Crown Itech I-T4000 versterker

Beschrijving

Power Output

• 2-Ohm Stereo (Per Channel): 1800W
• 4-Ohm Stereo (Per Channel): 2000W
• 8-Ohm Stereo (Per Channel): 1250W
• 4-Ohm Bridged-Mono: 3600W
• 8-Ohm Bridged-Mono: 4000W

Specifications

• Frequency Response (at 1 Watt, 20 Hz – 20 kHz): 0.25dB.
• Signal to Noise Ratio below rated 8-Ohm power, A-weighted: >105 dB
• Total Harmonic Distortion (THD) at full rated power: < 0.35%.
• Damping Factor (20 Hz to 100 Hz): > 5000.
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB.
• DC Output Offset: < 3 mV.
• Input Impedance (nominal): 20 kilohms Balanced, 10 kilohms Unbalanced.
• Maximum Input Level: +15 dBu or +22 dBu, depending on input Sensitivity.
• Latency (Analog, Digital inputs): 1.13 ms Analog, 1.81 ms Digital (96 kHz).
• A/D, D/A Converters: 24-bit, 96-kHz Cirrus Logic.
• Digital Input: AES/EBU, 16-24 bit, 32-48 kHz. Onboard sample rate converter. Optional CobraNet input coming soon.
• Network: Onboard TCP/IQ, compatible with standard 100-Mb Ethernet hardware.
• DSP: 24-bit conversion with 32-bit, floating-point DSP processing. Bypass mode available. Has 64 assignable filters with 9 different Filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators.
• Load Supervision: Monitors the average Impedance on the output of the Amplifier. If the Impedance falls outside the specified high/low limits, this function alerts the user via the front panel display, and via the IQwic software when Amp is on an IQ Network.
• Error Reporting: Reports clip errors, thermal errors, fault conditions and load monitoring errors for each channel via the front panel display and via IQwic software when Amp is on an IQ Network.
• Attenuators: Speed sensitive, continuously variable rotary Encoder, 0.5 dB steps, range 0 to 100 dB.

Genoemde prijs is huurprijs per dag. Voor meerdere dagen geldt een staffelkorting.